Today I will try to explain how to take apart the display assembly in Lenovo 3000N200 in order to replace broken LCD screen. The original model of the screen is LTN154X3-L06 which I have successfully replaced with LTN154X3-L01. Actually you can use almost any model of the LTN154X3 series as these models have standard 30-pin [...]
…..continued from Part 1. In this post I will continue with the disassembly of Lenovo 3000N200 but this time I will remove the top cover, cooling fan, system board, graphics card and heat sinks. As you will see in the pictures below the graphics card is implemented as a separate module that uses two connectors [...]
In the following guide I will try to describe in details how to disassemble a Lenovo 3000N200 series laptop. The main reason to take apart this laptop is to replace the LCD panel (you can see it is broken on the picture below) and also to replace the thermal paste on the CPU and graphics [...]
continued from previous post (part 1)……… In this post we will continue to disassemble Compaq 610 but this time we will pay attention to the removal of the display, top cover and the motherboard. I will also try to show you how to remove heat sink and replace the thermal paste of the CPU.
Today I will try to explain in details how to disassemble Compaq 610 laptop. I’m going to split this guide into two parts because most likely it will become too long for a single post. The main reason to take apart this laptop is that the cooling module needs cleaning as the heat sink was [...]
